本公司主营:小模数齿轮 螺旋伞齿轮 小模数齿轮加工 弧齿锥齿轮 直齿锥齿轮 缝纫机齿轮 割草机齿轮 园林工具齿轮 的加工... 电话:0519-83408381
首页 新闻中心 在线反馈 联系我们
缝纫机齿轮
割草机齿轮
风、电动工具齿轮
直齿锥齿轮
圆柱齿轮
小型机械齿轮
飞机齿轮
自行车,电动车,汽车齿轮
 
当前位置:首页 > 新闻中心新闻中心
美国乔伊斯弧齿锥齿轮千斤顶
发布时间:2012/12/20 浏览次数:1681

译文:弧齿锥齿轮千斤顶
乔伊斯锥齿轮®千斤顶,可在7.5吨到100吨的静态能力,提供更高的效率和更快的速度比其他机械螺旋千斤顶。作为一个额外的好处,伞齿轮插孔也作为斜切盒,多插孔的系统的理想选择。可指定多达三个输出轴安装电机,限位开关,读出设备和其他配件。锥齿轮插孔与单导螺杆(S系列)提供的好处的自锁螺纹和锥齿轮千斤顶,双丝杠(D系列)提供了更高的行驶速度。
选择的四个标准结束条件之一
防护靴和其他选项
右手和左手螺纹
乔伊斯/代顿可以自定义您的要求
乔伊斯/代顿锥齿轮插孔可在四个能力:
BG150(7.5吨)
BG250(15吨)
BG375(33吨)
BG450(100吨)
部件列表和插图都包含在O&M手册。序列号附加到产品外壳。

原文:BEVEL GEAR JACKS
Joyce Bevel Gear® Jacks, available in 7.5-ton to 100-ton static capacities, offer higher efficiency and greater speed than other mechanical screw jacks. As an added benefit, bevel gear jacks also act as miter boxes, making them an ideal choice for multi-jack systems. As many as three output shafts may be specified for mounting motors, limit switches, readout devices and other accessories. Bevel gear jacks with single lead screws (S series) provide the benefits of a self-locking screw, and bevel gear jacks with double lead screws (D series) offer even greater travel speed.
Choose one of four standard end conditions
Protective boots and other options are available
Right hand and left hand screw threads are available
Joyce/Dayton can customize to your specifications
Joyce/Dayton bevel gear jacks are available in four capacities:
BG150 (7.5 Ton)
BG250 (15 Ton)
BG375 (33 Ton)
BG450 (100 Ton)
Parts list and illustrations are included in the O&M Manual. Serial numbers are attached to the product housing.

译文:关于乔伊斯/代顿公司,总部设在俄亥俄州代顿,自1873年以来,一直是重型起重和定位设备的^制造商和全球数以千计的客户。无与伦比的工程和技术专长,该公司能够持续的时间和价格敏感的解决方案,把想法变成工作的解决方案。
我们广泛的产品线,在我们的ISO 9001:2008,印第安纳州波特兰市的工厂生产的起重设备,能够将负载从250磅到250万吨。我们生产的蜗杆齿轮和斜齿轮螺旋千斤顶,电动缸,滚珠螺杆传动,线性驱动器,以及全系列的螺钉和螺母...
乔伊斯提供了执行机构,一般工业用途,以及太阳能特定驱动器的线。此外,完整的系统 - 一切从轴系复杂的电机控制所需的组件 - 从乔伊斯。
我们有几十年的经验,设计系统,以满足客户的要求。当我们的标准设备不能满足应用的需求,我们定制。我们的工作人员,电气工程师和应用知识渊博,经验丰富,可为您提供服务。

原文:About Us
Since 1873, Joyce/Dayton Corp., with headquarters based in Dayton, Ohio, has been a leading manufacturer of heavy-duty lifting and positioning equipment and has thousands of customers worldwide. With unmatched engineering and technical expertise, the company consistently provides time- and price-sensitive solutions that turn ideas into working solutions.
Our extensive line of lifting equipment, manufactured at our ISO 9001:2008 Portland, Indiana facility, is able to move loads from 250-pounds to 250-tons. We produce worm gear and bevel gear screw jacks, electric cylinders, ball screw jacks,  linear actuators, as well as a full line of screws and nuts..
Joyce provides actuators for general industrial use as well as a line of solar specific actuators. Additionally, the components needed for complete systems – everything from shafting to complex motor controls – are available from Joyce.
We have decades of experience designing systems to meet customer requirements. When our standard equipment does not meet application requirements, we customize. Our staff of Application and Electrical engineers is knowledgeable, experienced, and available to serve you.

正文结束


天勋机械主营:小模数齿轮螺旋伞齿轮伞齿轮弧齿锥齿轮螺旋锥齿轮园林工具齿轮缝纫机齿轮割草机齿轮

技术支持:常州创联网络 网站管理 邮箱登陆首页 | 关于我们 | 产品中心 | 供应信息 | 新闻中心 | 人才招聘 | 在线反馈 | 联系我们
Copyright©2012 常州天勋机械科技有限公司 All rights reserved. 苏ICP备12044178号 版权声明 网站地图 sitemap
友情链接:螺旋伞齿轮 闪蒸干燥机 不锈钢球阀 蠕动泵 干燥设备 喷雾干燥机 机械网站精选 分类网站大全 粉料混合机 硅橡胶密封条 干法造粒机 PCD铣刀