译文：钻石齿轮是一家生产工业蜗杆齿轮，锥齿轮和离合的手动操作蜗轮蜗杆传动装置，用于化工，石油化工，炼油厂和市政街市。
钻石齿轮位于德克萨斯州的休斯顿，我们有代理大量库存的产品以及我们自己的内部机加工车间，修改我们的齿轮和制造安装的硬件，以适应几乎任何阀门配置。这使我们能够提供比竞争对手更快的交付。
原文：
Diamond Gear is a manufacturer of industrial worm gears, bevel gears and declutchable manual override worm gears used in chemical, petrochemical, refinery, and municipal markets.
Diamond Gear is located in Houston, Texas where we carry a vast inventory of products as well as our own in house machine shop to modify our gears and fabricate mounting hardware to fit just about any valve configuration. This enables us to offer much quicker delivery than our competitors.
钻石齿轮提供了一个在室内机加工车间，使我们能够定制我们的齿轮产品，以满足任何阀门制造商的要求。我们经验丰富的销售人员会审查您的要求设计和制造任何可能需要额外的安装硬件。
Diamond Gear offers an in house machine shop that allows us to customize our gear products to meet any valve manufacturers requirements. Our experienced sales staff will review your requirements design and fabricate any additional mounting hardware that may be required.
译文：我们广泛的产品范围与基本齿轮的设计和可选的直齿圆柱齿轮传递扭矩250磅 - 英尺到8000 FT-LBS和15000磅到25万磅的推力，使客户能够避免过度的大小和降低成本。
外壳由高强度球墨铸铁。
齿轮可以仅在转矩应用或组合使用，与推力。
塑料和金属管茎保护器是可用的。
润滑的生活和水密。
锥齿轮和小齿轮，以及上部和下部的轴承座圈制成的钢提高效率并延长使用寿命。
可选的直齿圆柱齿轮在外部安装，使用户现场安装减速齿轮的事件阀随着时间的推移变得更加困难。
手轮球墨铸铁制造管代替。这可以更好地支持钳在链轮运营商和助攻，操作的方便性，由于增加的质量。
手轮锁定式设计，输入轴，以确保严格，公司的契合。
球墨铸铁外壳和保持架是标准的“BG”系列，有助于防止处理过程中的损坏。
输入轴为410不锈钢，圆锥滚子轴承承受轴向负荷与支持。
原文：Our broad product range with 7 basic gear designs and optional spur gears deliver torque from 250 FT-LBS to 8000 FT-LBS and 15,000 lbs to 250,000 lbs of thrust enable customers to avoid over sizing and reduce cost.
Housings are made of high strength ductile iron.
Gears can be utilized in torque only applications or in combination with thrust.
Both plastic and metal stem protectors are available.
Lubricated for life and watertight.
Bevel and pinion gears along with the upper and lower bearing races made of steel increase efficiency and extend service life.
Optional spur gears are externally mounted and enable users to field mount reduction gears in the event valves become more difficult to operate over time.
Handwheels are cast ductile iron in lieu of fabricated tube. This better supports clamp-on chain wheel operators and assists in the ease of operation due to increased mass.
Handwheels are keyed to input shaft to assure tight, firm fit.
Ductile iron housings and retainers are standard on “BG” Series help to prevent damage during handling.
Input shafts are 410 stainless and supported with tapered roller bearing to support axial loads.
正文结束!
天勋机械主营：
小模数齿轮，
螺旋伞齿轮，
伞齿轮，
弧齿锥齿轮，
螺旋锥齿轮，
园林工具齿轮，
缝纫机齿轮，
割草机齿轮！
